|
Post by Anthony A. on Aug 16, 2016 4:10:13 GMT -6
Well i can't seem to figure this out to save my life, i saw Smartys cheat sheet everything mapped accordingly but no luck. Truck is obviously still a W.I.P (Acts as a Left Turn Signal) Pretty Obvious
|
|
|
Post by Moose78 on Aug 16, 2016 7:15:28 GMT -6
|
|
|
Post by Anthony A. on Aug 16, 2016 12:22:10 GMT -6
Thanks bud I've watched that one too! Did it the exact way he did it no luck everything on channel 2 is mapped to the different tiles its just there lighting up like that^
|
|
Smarty
Gold Certificate Member
PTTM Hardcore
Cooookie!
Posts: 564
|
Post by Smarty on Aug 16, 2016 12:38:15 GMT -6
Could you post a screenshot of your uv mapper window, showing the mapping of your lights on the lightmask?
|
|
|
Post by Anthony A. on Aug 16, 2016 23:34:57 GMT -6
Could you post a screenshot of your uv mapper window, showing the mapping of your lights on the lightmask?
|
|
r.modjeski
Gold Certificate Member
Yes, I live in Commiefornia
Posts: 1,079
|
Post by r.modjeski on Aug 18, 2016 8:26:00 GMT -6
Make sure you enable the mesh to support 2 channels.
|
|
|
Post by Anthony A. on Aug 18, 2016 11:28:21 GMT -6
Make sure you enable the mesh to support 2 channels. Thanks I've done that as well i think the problem may be in my >dds im not very familiar on how to through together a light mask.
|
|
Smarty
Gold Certificate Member
PTTM Hardcore
Cooookie!
Posts: 564
|
Post by Smarty on Aug 18, 2016 19:07:10 GMT -6
Your mapping is offset one tile to the left; Where the image is visible in the mapping window is tile '0'. To fix it, you'll want to select all of your mapping on that uv channel and move it one tile to the right. Start with that and we'll see if there are still any troubles to address.
|
|
|
Post by Anthony A. on Aug 18, 2016 21:56:00 GMT -6
Your mapping is offset one tile to the left; Where the image is visible in the mapping window is tile '0'. To fix it, you'll want to select all of your mapping on that uv channel and move it one tile to the right. Start with that and we'll see if there are still any troubles to address. Alrighty, Thanks Smarty . Fixed my mapping by moving one tile to the right, though both my signals still flash as only the left should i separate the objects in zmod? And for some reason the running lights are still lighting up the all white color. The base of the truck is the Kenworth W900
|
|